On some eigenvalue problems for elastic instabilities in tension

Liu, Xiang (2013) On some eigenvalue problems for elastic instabilities in tension. PhD thesis, University of Glasgow.

Full text available as:
[thumbnail of 2013liuphd.pdf] PDF
Download (2MB)
Printed Thesis Information: https://eleanor.lib.gla.ac.uk/record=b2977186

Abstract

It is well known that buckling instabilities occur when elastic solids are subject to compressive stresses. However, this does not preclude the occurrence of instabilities in systems subject to global tensile loads. Such tensile instabilities may be caused by certain discontinuities (geometrical or material) which re-distribute the stresses applied on its boundary, generating local compressive stresses inside the solid. This research deals with the tensile instabilities in elastic solids by using linear bifurcation analysis, which leads to eigenvalue problems. Then the links between mechanics and mathematics in these tensile instabilities/eigen-systems are demonstrated by using a combination of both numerical and asymptotic analyses. Three main problems have been investigated: a hybrid energy method on edge-buckling, the tensile wrinkling of a stretched bi-annular plate, and the tensile instabilities developed in a radially stretched thick cylindrical tube.

We start by recording a coordinate-free derivation for Föppl–von Kármán equations and the corresponding bifurcation equations (both weak forms and strong forms with their boundary conditions) based on minimum energy principle. This set of equations is applicable to anisotropic elastic thin plates in any planar geometries, which is then specialised for the bifurcation problem of isotropic elastic plates, and a further case under in-plane loading.

In the first main problem, we propose a hybrid energy method which provides an accurate and computationally efficient algorithm for the instability analysis of a class of edge-buckling problems. This algorithm is based on the existing simplest asymptotic approximations and an energy principle (weak form for bifurcation). Fairly accurate and robust approximations can be achieved for both the critical buckling load and mode number even though the simplest asymptotic ansatz is employed. We also explore a number of additional mathematical features that have an intrinsic interest in the context of multi-parameter eigenvalue problems.

Then we consider the wrinkling instabilities of a stretched bi-annular plate, which consists of two fully bonded concentric annuli with different mechanical properties. The effects of the mechanical and geometrical parameters on critical wrinkling are studied, using both numerical and asymptotic techniques. It is found that the critical external buckling loading, the wrinkle numbers and the wrinkled-shape can behave completely differently compared with the single-annular case. The influence of discontinuities (the interface between these two annuli) on localised instabilities is also illustrated thoroughly. Finally, a WKB analysis is conducted which provides accurate approximations.

In the third problem, we consider the bifurcation of an infinite thick cylindrical tube made of St. Venant–Kirchhoff elastic material, subject to radial tensile loading on both inner and outer walls. In particular, linear Lamé solutions in plane-strain are taken for the pre-bifurcation state, and the bifurcation equations are obtained by using Biot’s incremental bifurcation theory. The bifurcation of this plane-strain problem is completely different from the corresponding plane-stress case. Numerical investigations reveal two main bifurcation modes: a long-wave local deformation around the central hole of the domain, or a material wrinkling-type instability along the same boundary. Strictly speaking, the latter scenario is related to the violation of the Shapiro-Lopatinskij condition in an appropriate traction boundary-value problem. It is further shown that the main features of this material instability mode can be found by using a singular-perturbation strategy.

Item Type: Thesis (PhD)
Qualification Level: Doctoral
Keywords: tensile instabilities, wrinkling, linear bifurcation, eigenvalue problems, Föppl–von Kármán equations, numerical analysis, asymptotic analysis, hybrid energy method, thin plates, thick cylindrical tube, bi-annular plate
Subjects: Q Science > QA Mathematics
T Technology > TJ Mechanical engineering and machinery
Colleges/Schools: College of Science and Engineering > School of Mathematics and Statistics
Supervisor's Name: Coman, Dr. Ciprian and Fearn, Prof. David
Date of Award: 2013
Depositing User: Mr Xiang Liu
Unique ID: glathesis:2013-4154
Copyright: Copyright of this thesis is held by the author.
Date Deposited: 12 Apr 2013 08:58
Last Modified: 12 Apr 2013 09:01
URI: https://theses.gla.ac.uk/id/eprint/4154

Actions (login required)

View Item View Item

Downloads

Downloads per month over past year