Bird, Hugh J.A. (2021) Low-order methods for the unsteady aerodynamics of finite wings. PhD thesis, University of Glasgow.

Boonruang, Arjin (2021) Fabrication and characterisation of microultrasound array transducers. PhD thesis, University of Glasgow.

Boychev, Kiril (2021) Shock wave-boundary-layer interactions in high-speed intakes. PhD thesis, University of Glasgow.

Chen, Yuxuan (2021) Comparison of different methods for OPF problem of multi-objective optimization. MSc(R) thesis, Unversity of Glasgow.

Cholet, Fabien (2021) Optimising and applying RNA based approaches to identify active nitrifiers in coastal sediments. PhD thesis, University of Glasgow.

Costantini, Rosa (2021) Strain across historic tapestries: a multi-analytical investigation on damage mechanisms and conservation strategies. PhD thesis, University of Glasgow.

Dai, Shaowei (2021) Adaptive beamforming and switching in smart antenna systems. PhD thesis, University of Glasgow.

Do, Dang Khoa (2021) Microstructure characterizing and mechanical properties of Selective Laser Melted Ti-6AL-4V alloys. PhD thesis, University of Glasgow.

Emenike, Scholastica N. (2021) Optimisation of energy supply chains considering sustainability aspects. PhD thesis, University of Glasgow.

Flessa, Thaleia (2021) Analysis of inverse simulation algorithms with an application to planetary rover guidance and control. PhD thesis, University of Glasgow.

Fu, Yuchen (2021) Smart Raman activated cell sorting (sRACS) system. MPhil(R) thesis, University of Glasgow.

Giles-Donovan, Nathan James (2021) Characterisation of competing orders in dielectric oxides. PhD thesis, University of Glasgow.

Griškevičiūtė, Ugnė (2021) Germanium on silicon for mid-infrared photonics. PhD thesis, University of Glasgow.

Hann, Reuben (2021) Optimisation and analysis of injector geometry on a centre-bodiless continuous rotating detonation rocket engine. MSc(R) thesis, University of Glasgow.

Koester, Anna Magdalena (2021) The spatial dynamics of insulin-regulated GLUT4 dispersal. PhD thesis, University of Glasgow.

Li, Haobo (2021) Multimodal radar sensing for ambient assisted living. PhD thesis, University of Glasgow.

Malapaschas, Aris (2021) Voice assistants for people with cognitive impairments due to acquired brain injury. PhD thesis, University of Glasgow.

Miller, Jennifer (2021) Ultrasound imaging analysis for diagnostics of functional muscle status and evaluation of rehabilitation techniques in spinal cord injury (SCI). PhD thesis, University of Glasgow.

Orchin, Gavin John (2021) Two dimensional superconductors for infrared photodetection. PhD thesis, University of Glasgow.

Qiao, Geng (2021) Parametric study of aerodynamic performance of equivalent ducted/un-ducted propellers based on high-fidelity computational fluid dynamics. MSc(R) thesis, University of Glasgow.

Rey, José Manuel (2021) Tunable collagen microgels for growth factor delivery. PhD thesis, University of Glasgow.

Shrestha, Aman (2021) Radar based discrete and continuous activity recognition for assisted living. PhD thesis, University of Glasgow.

Skopalik, Simeon Evgeniy (2021) Fractional flow reserve derived through computational fluid dynamics: a non-invasive index for assessing the severity of arterial stenotic disease. PhD thesis, University of Glasgow.

Sneddon, Scott (2021) Studies on the mechanical behaviour of titanium alloys and the role of aluminium content: a comparison between Ti-6Al-4V and Ti407. PhD thesis, University of Glasgow.

Tan, Moh Chuan (2021) Design of antenna array and data streaming platform for low-cost smart antenna systems. PhD thesis, University of Glasgow.

Turkington, Graeme (2021) In-situ detection of strontium 90 in groundwater boreholes with a novel detector at nuclear decommissioning sites. PhD thesis, University of Glasgow.

Xu, Yi (2021) New stochastic modeling methodology and novel monitoring devices for scour prediction and assessment. PhD thesis, University of Glasgow.

Yang, Bowen (2021) Mixed-numerology for radio access network slicing. PhD thesis, University of Glasgow.

Yang, Jimeng (2021) A multi-objective prediction and optimisation method for additive manufacturing technology. PhD thesis, University of Glasgow.