Glasgow Theses Service

Items where Subject is "T Technology > TJ Mechanical engineering and machinery"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators Name | Item Type
Jump to: A | B | C | D | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | V | W | X | Y | Z
Number of items at this level: 92.

A

Abderrahim, Mohamed (1996) Modelling of robotic manipulators. PhD thesis, University of Glasgow.

Abdiwi, Farag Abdussalm Ali (2013) Characterisation and modelling of the shear-tension coupling and variability of woven engineering fabrics. PhD thesis, University of Glasgow.

Al-Budairi, Hassan Dakhil (2012) Design and analysis of ultrasonic horns operating in longitudinal and torsional vibration. PhD thesis, University of Glasgow.

Al-Sarraf, Ziad Shakeeb (2013) A study of ultrasonic metal welding. PhD thesis, University of Glasgow.

Ali, Imran (2010) Spacecraft nonlinear attitude control with bounded control input. PhD thesis, University of Glasgow.

Alsayednoor, Jafar (2013) Modelling and characterisation of porous materials. PhD thesis, University of Glasgow.

Ankersen, Jesper (1999) Quantifying the forces in stabbing incidents. PhD thesis, University of Glasgow.

Atia, Khaled Roshdy El-Hosainy (2000) Dynamic analysis, design and control of an industrial parallel robot. PhD thesis, University of Glasgow.

B

Bevan, Geraint Paul (2008) Development of a vehicle dynamics controller for obstacle avoidance. PhD thesis, University of Glasgow.

Biglarifadafan, Ali (2014) A general hybrid force-based method for structural analysis. PhD thesis, University of Glasgow.

Bitadze, Alexander (2014) Thermo-dynamical measurements for ATLAS Inner Detector (evaporative cooling system). PhD thesis, University of Glasgow.

Bourquin, Yannyk Parulian Julian (2012) Shaping surface waves for diagnostics. PhD thesis, University of Glasgow.

C

Cardoni, Andrea (2003) Characterising the dynamic response of ultrasonic cutting devices. PhD thesis, University of Glasgow.

Chen, Yi (2010) Dynamical modelling of a flexible motorised momentum exchange tether and hybrid fuzzy sliding mode control for spin-up. PhD thesis, University of Glasgow.

Chia, Julian Yan Hon (2002) A micromechanics-based continuum damage mechanics approach to the mechanical behaviour of brittle matrix composites. PhD thesis, University of Glasgow.

Chong, Gregory Chow Ye (2006) Trajectory-scheduling control systems and their multi-objective design automation. PhD thesis, University of Glasgow.

Cockroft, Jeremy Paul (1979) Heat transfer and air flow in buildings. PhD thesis, University of Glasgow.

Coupaud, Sylvie A.F. (2005) Development and assessment of methods for arm-cranking exercise assisted by functional electrical stimulation (FES) in tetraplegia. PhD thesis, University of Glasgow.

D

Davie, Mark C. (2011) Mountain bike suspension systems and their effect on rider performance quantified through mechanical, psychological and physiological responses. PhD thesis, University of Glasgow.

Demircioḡlu, Hüseyin (1989) Continuous-time self-tuning algorithms. PhD thesis, University of Glasgow.

Dodds, Colin J. (1972) The response of vehicle components to random road surface undulations. PhD thesis, University of Glasgow.

F

Fang, Juan (2013) Computer modelling and experimental design of a gait orthosis for early rehabilitation of walking. PhD thesis, University of Glasgow.

Ferrario, Chiara (2006) Functional electrical stimulation (FES) leg cycling exercise in paraplegia: a pilot study for the definition and assessment of exercise testing protocols and efficacy of exercise. PhD thesis, University of Glasgow.

G

Govan, Michelle (2002) The analysis and design of multirate sampled-data feedback systems via a polynomial approach. PhD thesis, University of Glasgow.

H

Hunter, Graham I. (2008) Bacterial inactivation using radial mode ultrasonic devices. PhD thesis, University of Glasgow.

Hye, Md. Abdul (2012) Simulation of transient blood flow in models of arterial stenosis and aneurysm. PhD thesis, University of Glasgow.

I

Ismail, Rainah (2013) Vibration analysis of a plate with an arbitrarily orientated surface crack. PhD thesis, University of Glasgow.

Israr, Asif (2008) Vibration analysis of cracked aluminium plates. PhD thesis, University of Glasgow.

J

Jaime, Ralf-Peter (2002) On the control of paraplegic standing using functional electrical stimulation. PhD thesis, University of Glasgow.

Jamieson, Lindsay Patricia (2007) Development and assessment of novel methods of exercise testing during treadmill gait in incomplete spinal cord injury. PhD thesis, University of Glasgow.

Jebur, Qusai Hatem (2013) Characterisation and modelling of transversely isotropic flexible viscoelastic foam. PhD thesis, University of Glasgow.

Jimoh, Mohammed Tajudeen (2013) A vision for MPC performance maintenance. PhD thesis, University of Glasgow.

K

Kelly, Stephanie (2012) Fabrication of polymer composites as potential bone replacement materials. PhD thesis, University of Glasgow.

Kennedy, Paul (2002) Design practice: routine creativity. PhD thesis, University of Glasgow.

Kriama, Abdulbast (2011) 3D complex shaped- dissolvable multi level micro/nano mould fabrication. PhD thesis, University of Glasgow.

Krishnan, Anand (2008) Laser and optical based methods for detecting and characterising microorganisms. PhD thesis, University of Glasgow.

L

Lim, Fannon Chwee Ning (2003) A preliminary investigation into the effects of nonlinear response modification within coupled oscillators. PhD thesis, University of Glasgow.

Liu, Haofei (2010) Numerical simulation of the instabilities of a 2D collapsible channel flow. PhD thesis, University of Glasgow.

Liu, Xiang (2013) On some eigenvalue problems for elastic instabilities in tension. PhD thesis, University of Glasgow.

Lucas, Timothy David (1999) Computational modelling of the golf stroke. PhD thesis, University of Glasgow.

M

MacBeath, Alan (2006) Ultrasonic bone cutting. PhD thesis, University of Glasgow.

Mathieson, Andrew C. (2012) Nonlinear characterisation of power ultrasonic devices used in bone surgery. PhD thesis, University of Glasgow.

McCourt, Finlay (2013) Constructing ancient mechanics. MPhil(R) thesis, University of Glasgow.

McCulloch, Euan (2008) Experimental and finite element modelling of ultrasonic cutting of food. PhD thesis, University of Glasgow.

McKenzie, David J. (2010) The dynamics of tethers and space-webs. PhD thesis, University of Glasgow.

McRae, Calum George Alexander (2006) Approaches to functional electrical stimulation induced cycling and application for the child with a spinal cord injury. PhD thesis, University of Glasgow.

McRobb, Malcolm (2014) Development and enhancement of various mechanical oscillators for application in vibrational energy harvesting. PhD thesis, University of Glasgow.

Menk, Alexander (2011) Simulation of complex microstructural geometries using X-FEM and the application to solder joint lifetime prediction. PhD thesis, University of Glasgow.

Mine, Takashi (2010) Laser and plasma air decontamination. PhD thesis, University of Glasgow.

Molla, Md Mamun (2009) LES of pulsatile flow in the models of arterial stenosis and aneurysm. PhD thesis, University of Glasgow.

Muhammad Saleh, Muhammad Fadzli (2013) Active improvement of air-conditioning system energy consumption with adaptive thermal comfort approach. MSc(R) thesis, University of Glasgow.

Murray, Christopher (2011) Continuous Earth-Moon payload exchange using motorised tethers with associated dynamics. PhD thesis, University of Glasgow.

Murray-Smith, David J. (2009) Methods of system identification, parameter estimation and optimisation applied to problems of modelling and control in engineering and physiology. DSc thesis, University of Glasgow.

Mustafa, Zaleha Binti (2013) Multiaxial fatigue characterization of self-reinforced polylactic acid-calcium phosphate composite. PhD thesis, University of Glasgow.

N

Nelson, D. James (1976) On the mechanics of discontinuous fibre reinforced composite materials (with particular reference to damping). PhD thesis, University of Glasgow.

Neville, Anne (1995) An investigation of the corrosion behaviour of a range of engineering materials in marine environments. PhD thesis, University of Glasgow.

Ng, Eric Eng Seng (1999) Laser welding of high carbon steels. PhD thesis, University of Glasgow.

O

O'Neill, Simon James (2012) Control of vehicle lateral dynamics based on longitudinal wheel forces. MSc(R) thesis, University of Glasgow.

Oo, Khin Maung (1974) The design of semi-submersibles for minimum vertical motion. PhD thesis, University of Glasgow.

Ouyang, Donald N.B. (1998) The dynamic modelling of industrial oxygen gas jet assisted CO₂ laser cutting of metal. PhD thesis, University of Glasgow.

P

Paul, Sreebash Chandra (2008) Large eddy simulation of a fuel-rich turbulent non-premixed reacting flow with radiative heat transfer. PhD thesis, University of Glasgow.

Pennycott, Andrew (2008) The application of estimation and control techniques in 2 modes of exercise for the spinal cord injured. PhD thesis, University of Glasgow.

Perry, Joan M. (2001) Erosion-corrosion of WC-Co-Cr cermet coatings. PhD thesis, University of Glasgow.

Pilidis, Pericles (1983) Digital simulation of gas turbine performance. PhD thesis, University of Glasgow.

Pino, Monica (2010) Apatite deposition on NaOH-treated HDPE, PEEK and UHMWPE films for sclera materials in artificial cornea implants. PhD thesis, University of Glasgow.

Piron, Marielle (1999) Dynamic analysis of fast-acting solenoid actuators. PhD thesis, University of Glasgow.

Q

Qiu, Yihong (2003) Measurement and analysis of breath sounds. PhD thesis, University of Glasgow.

R

Redzuan, Norizah (2010) Cold plasma air decontamination. PhD thesis, University of Glasgow.

Renucci, Michael Peter (1984) Mathematical modelling techniques for the computer simulation of vehicle dynamic performance and response. PhD thesis, University of Glasgow.

Roberts, David Wynn (1993) Bond graph model based control of robotic manipulators. PhD thesis, University of Glasgow.

Rose, Michael Leon James (1998) Development of a muscle powered blood pump: fluid mechanic considerations. PhD thesis, University of Glasgow.

S

Saunders, Benjamin A. (2002) Automotive climate control based on thermal state estimation. PhD thesis, University of Glasgow.

Schinkel, Michael (2002) Nondeterministic hybrid dynamical systems. PhD thesis, University of Glasgow.

Schubert, Gerlind (2014) Manufacture, characterisation and modelling of magneto-rheological elastomers. PhD thesis, University of Glasgow.

Shaw, Brian H. (1976) Heat and mass transfer by convection through large rectangular openings in vertical partitions. PhD thesis, University of Glasgow.

Shrestha, Suman Kumar (2000) Corrosion and erosion-corrosion of High Velocity Oxy-Fuel (HVOF) sprayed NiCrSiB coatings. PhD thesis, University of Glasgow.

Smith, Margaret J. (2007) The use of hydrogels to prevent biofouling on underwater sensors. PhD thesis, University of Glasgow.

Stone, Barry A. (2005) Control strategies for functional electrical stimulation induced cycling. PhD thesis, University of Glasgow.

Su, Xiangrong (2009) Parametric vibration of composite beams with integrated shape memory alloy elements. PhD thesis, University of Glasgow.

T

Talal, Ahmed (2009) Investigation of the application of polylactic acid-calcium phosphate composite materials as novel periodontal barrier membranes. PhD thesis, University of Glasgow.

Terfas, Osama Abdulhamid (2010) Quantification of constraint in three-dimensional fracture mechanics. PhD thesis, University of Glasgow.

Trchalik, Josef (2009) Aeroelastic modelling of gyroplane rotors. PhD thesis, University of Glasgow.

V

Vassiliou, George E. (2001) The erosion-corrosion behaviour of copper-nickel alloys. PhD thesis, University of Glasgow.

W

Waterton, Richard James (2004) Analysis of the soliton solutions of a 3-level Maxwell-Bloch system with rotational symmetry. PhD thesis, University of Glasgow.

Worms, Georg (2011) Design and evaluation of artificial controllers assisting voluntary balance performance in paraplegia and in stroke. PhD thesis, University of Glasgow.

Wu, Jia-Jang (2000) An analysis of the structural dynamics of a mobile gantry crane with application to automation of container management. PhD thesis, University of Glasgow.

X

Xia, Chunming (2003) Control loop measurement based isolation of faults and disturbances in process plants. PhD thesis, University of Glasgow.

Y

Yassi, Yousef (1999) An experimental study of improvement of a micro hydro turbine performance. PhD thesis, University of Glasgow.

Young, Rupert Charles David (1994) Bandpass filters for unconstrained target recognition and their implementation in coherent optical correlators. PhD thesis, University of Glasgow.

Yuceer, Ahmet (1985) Pressure drops along the bores of hollow fibre membranes: their measurement, prediction and effect on fibre bundle performance. PhD thesis, University of Glasgow.

Z

Zang, Xiaoyun (2005) Root cause isolation of propagated oscillations in process plants. PhD thesis, University of Glasgow.

Ziegler, Spencer Wilson (2003) The rigid-body dynamics of tethers in space. PhD thesis, University of Glasgow.

This list was generated on Sun Sep 21 05:04:57 2014 BST.