Items where Subject is "TJ Mechanical engineering and machinery"

Group by: Creators Name | Item Type
Jump to: Thesis
Number of items at this level: 149.

Thesis

Abderrahim, Mohamed (1996) Modelling of robotic manipulators. PhD thesis, University of Glasgow.

Abdiwi, Farag Abdussalm Ali (2013) Characterisation and modelling of the shear-tension coupling and variability of woven engineering fabrics. PhD thesis, University of Glasgow.

Akwu-Ude, Allen Ude (2019) Water footprint in algaculture for advanced biofuels and high value products. PhD thesis, University of Glasgow.

Al-Budairi, Hassan Dakhil (2012) Design and analysis of ultrasonic horns operating in longitudinal and torsional vibration. PhD thesis, University of Glasgow.

Al-Kayiem, Ali Abbas Hameed (2017) Investigation of travelling-wave thermoacoustic engines with different configurations. PhD thesis, University of Glasgow.

Al-Sarraf, Ziad Shakeeb (2013) A study of ultrasonic metal welding. PhD thesis, University of Glasgow.

Al-Waaly, Ahmed (2015) The effect of heat transfer on temperature measurement and it’s applications to study microchannel heat sinks. PhD thesis, University of Glasgow.

Ali, Imran (2010) Spacecraft nonlinear attitude control with bounded control input. PhD thesis, University of Glasgow.

Ali, Mehmood (2015) Enhancing oil extraction processes for flaxseed and microalgae. PhD thesis, University of Glasgow.

Alsayednoor, Jafar (2013) Modelling and characterisation of porous materials. PhD thesis, University of Glasgow.

Ankersen, Jesper (1999) Quantifying the forces in stabbing incidents. PhD thesis, University of Glasgow.

Asif, Muhammad Shahzad Qamar (2018) The simulation and analysis of fault diagnosis and isolation for gas turbine control system. MSc(R) thesis, University of Glasgow.

Atia, Khaled Roshdy El-Hosainy (2000) Dynamic analysis, design and control of an industrial parallel robot. PhD thesis, University of Glasgow.

Bejarano Durán, Fernando (2014) Miniature ultrasonic bone cutting device based on a cymbal transducer. PhD thesis, University of Glasgow.

Bevan, Geraint Paul (2008) Development of a vehicle dynamics controller for obstacle avoidance. PhD thesis, University of Glasgow.

Bezenšek, Boštjan (2003) Elastic-plastic crack problems in the ductile-brittle transition. PhD thesis, University of Glasgow.

Big-Alabo, Akuro (2015) Multilayered sensor-actuator plates for active mitigation of elastoplastic impact effects. PhD thesis, University of Glasgow.

Biglarifadafan, Ali (2014) A general hybrid force-based method for structural analysis. PhD thesis, University of Glasgow.

Bitadze, Alexander (2014) Thermo-dynamical measurements for ATLAS Inner Detector (evaporative cooling system). PhD thesis, University of Glasgow.

Boumedmed, Abdelkader (1997) The use of variable engine geometry to improve the transient performance of a two-spool turbofan engine. PhD thesis, University of Glasgow.

Bourquin, Yannyk Parulian Julian (2012) Shaping surface waves for diagnostics. PhD thesis, University of Glasgow.

Byabagambi, Charles Adyeeri (1987) Surface heating in metals irradiated by fast I.R. laser pulses. PhD thesis, University of Glasgow.

Caboni, Marco (2016) Probabilistic design optimization of horizontal axis wind turbine rotors. PhD thesis, University of Glasgow.

Cardoni, Andrea (2003) Characterising the dynamic response of ultrasonic cutting devices. PhD thesis, University of Glasgow.

Check, Gholam Reza (2023) Ultrasonic dewatering pretreatment for demulsification of biocrudes and improved biofuel production via pyrolysis. PhD thesis, University of Glasgow.

Chen, Ning (1997) The effects of constraint on three dimensional elastic-plastic crack tip fields. MSc(R) thesis, University of Glasgow.

Chia, Julian Yan Hon (2002) A micromechanics-based continuum damage mechanics approach to the mechanical behaviour of brittle matrix composites. PhD thesis, University of Glasgow.

Chong, Gregory Chow Ye (2006) Trajectory-scheduling control systems and their multi-objective design automation. PhD thesis, University of Glasgow.

Christodoulou, Loizos (2018) On the nonlinear dynamics of convective-diffusive-reactive waves. PhD thesis, University of Glasgow.

Cleary, Rebecca Shirley (2020) Resonant ultrasonic bone penetrating needles. PhD thesis, University of Glasgow.

Cockroft, Jeremy Paul (1979) Heat transfer and air flow in buildings. PhD thesis, University of Glasgow.

Collings, Peter (2018) Theoretical and experimental analysis of an organic Rankine Cycle. PhD thesis, University of Glasgow.

Coupaud, Sylvie A.F. (2005) Development and assessment of methods for arm-cranking exercise assisted by functional electrical stimulation (FES) in tetraplegia. PhD thesis, University of Glasgow.

Craven, Colm Tadhg Donal (2015) Development and evaluation of rehabilitation technologies for early-stage spinal cord injury. PhD thesis, University of Glasgow.

Davie, Mark C. (2011) Mountain bike suspension systems and their effect on rider performance quantified through mechanical, psychological and physiological responses. PhD thesis, University of Glasgow.

Demircioḡlu, Hüseyin (1989) Continuous-time self-tuning algorithms. PhD thesis, University of Glasgow.

Do, Dang Khoa (2021) Microstructure characterizing and mechanical properties of Selective Laser Melted Ti-6AL-4V alloys. PhD thesis, University of Glasgow.

Dodds, Colin J. (1972) The response of vehicle components to random road surface undulations. PhD thesis, University of Glasgow.

Elliott, Alexander J. (2020) Accurate approximations for nonlinear vibrations. PhD thesis, University of Glasgow.

Fang, Juan (2013) Computer modelling and experimental design of a gait orthosis for early rehabilitation of walking. PhD thesis, University of Glasgow.

Feeney, Andrew (2014) Nitinol cymbal transducers for tuneable ultrasonic devices. PhD thesis, University of Glasgow.

Ferrario, Chiara (2006) Functional electrical stimulation (FES) leg cycling exercise in paraplegia: a pilot study for the definition and assessment of exercise testing protocols and efficacy of exercise. PhD thesis, University of Glasgow.

Firstbrook, David (2017) Ultrasonically assisted penetration through granular materials for planetary exploration. PhD thesis, University of Glasgow.

Flores Saldivar, Alfredo Alan (2018) Predicting potential customer needs and wants for agile design and manufacture in an industry 4.0 environment. PhD thesis, University of Glasgow.

Fujiwara, Kosuke (2020) Studies on leading-edge flow separation and film cooling using advanced laser diagnostics. PhD thesis, University of Glasgow.

Gigante, Fabio Antonio (2016) Time- and frequency-domain turbulent flow analysis of wind turbine unsteady aerodynamics. PhD thesis, University of Glasgow.

Govan, Michelle (2002) The analysis and design of multirate sampled-data feedback systems via a polynomial approach. PhD thesis, University of Glasgow.

Grant, Andrew D. (1973) The effect of heat transfer on boundary layer stability. PhD thesis, University of Glasgow.

Guerrero Martinez, Fernando Javier (2017) Three-dimensional numerical models for free convection in porous enclosures heated from below. PhD thesis, University of Glasgow.

Hunter, Graham I. (2008) Bacterial inactivation using radial mode ultrasonic devices. PhD thesis, University of Glasgow.

Hye, Md. Abdul (2012) Simulation of transient blood flow in models of arterial stenosis and aneurysm. PhD thesis, University of Glasgow.

Irthiea, Ihsan Khalaf (2014) Process analysis and design in micro deep drawing utilizing a flexible die. PhD thesis, University of Glasgow.

Ismail, Rainah (2013) Vibration analysis of a plate with an arbitrarily orientated surface crack. PhD thesis, University of Glasgow.

Israr, Asif (2008) Vibration analysis of cracked aluminium plates. PhD thesis, University of Glasgow.

Jaime, Ralf-Peter (2002) On the control of paraplegic standing using functional electrical stimulation. PhD thesis, University of Glasgow.

Jamieson, Lindsay Patricia (2007) Development and assessment of novel methods of exercise testing during treadmill gait in incomplete spinal cord injury. PhD thesis, University of Glasgow.

Jebur, Qusai Hatem (2013) Characterisation and modelling of transversely isotropic flexible viscoelastic foam. PhD thesis, University of Glasgow.

Jimoh, Mohammed Tajudeen (2013) A vision for MPC performance maintenance. PhD thesis, University of Glasgow.

Kamble, Prashant Ram (2020) Enhanced instrumentation, control and process optimisation for biomass gasification. PhD thesis, University of Glasgow.

Karstensen, Annette Degn (1996) Constraint estimation schemes in fracture mechanics. PhD thesis, University of Glasgow.

Kelly, Stephanie (2012) Fabrication of polymer composites as potential bone replacement materials. PhD thesis, University of Glasgow.

Kennedy, Paul (2002) Design practice: routine creativity. PhD thesis, University of Glasgow.

Khalighy, Shahabeddin (2015) Product design methodology supporting aesthetic evaluation. PhD thesis, University of Glasgow.

Kodsi, Costy (2017) Computational framework for fracture of graphite bricks in an AGR core. PhD thesis, University of Glasgow.

Kriama, Abdulbast (2011) 3D complex shaped- dissolvable multi level micro/nano mould fabrication. PhD thesis, University of Glasgow.

Krishnan, Anand (2008) Laser and optical based methods for detecting and characterising microorganisms. PhD thesis, University of Glasgow.

Kyriakis, Sotirios A. (2016) Geothermal district heating networks: modelling novel operational strategies incorporating heat storage. PhD thesis, University of Glasgow.

Lim, Fannon Chwee Ning (2003) A preliminary investigation into the effects of nonlinear response modification within coupled oscillators. PhD thesis, University of Glasgow.

Liu, Haofei (2010) Numerical simulation of the instabilities of a 2D collapsible channel flow. PhD thesis, University of Glasgow.

Liu, Xiang (2013) On some eigenvalue problems for elastic instabilities in tension. PhD thesis, University of Glasgow.

Loland, Olaf (1978) A vibration method for integrity monitoring of fixed offshore steel platforms. PhD thesis, University of Glasgow.

Lucas, Timothy David (1999) Computational modelling of the golf stroke. PhD thesis, University of Glasgow.

MacBeath, Alan (2006) Ultrasonic bone cutting. PhD thesis, University of Glasgow.

MacLennan, Iain James (1996) Two parameter engineering fracture mechanics. PhD thesis, University of Glasgow.

Mathieson, Andrew C. (2012) Nonlinear characterisation of power ultrasonic devices used in bone surgery. PhD thesis, University of Glasgow.

McCourt, Finlay (2013) Constructing ancient mechanics. MPhil(R) thesis, University of Glasgow.

McCulloch, Euan (2008) Experimental and finite element modelling of ultrasonic cutting of food. PhD thesis, University of Glasgow.

McGilp, Malcolm (2018) An integrated design environment for electric machines. PhD thesis, University of Glasgow.

McKenzie, David J. (2010) The dynamics of tethers and space-webs. PhD thesis, University of Glasgow.

McRae, Calum George Alexander (2006) Approaches to functional electrical stimulation induced cycling and application for the child with a spinal cord injury. PhD thesis, University of Glasgow.

McRobb, Malcolm (2014) Development and enhancement of various mechanical oscillators for application in vibrational energy harvesting. PhD thesis, University of Glasgow.

Meng, Xuan (2018) Numerical analysis of a fluid droplet subject to acoustic waves. PhD thesis, University of Glasgow.

Menk, Alexander (2011) Simulation of complex microstructural geometries using X-FEM and the application to solder joint lifetime prediction. PhD thesis, University of Glasgow.

Mine, Takashi (2010) Laser and plasma air decontamination. PhD thesis, University of Glasgow.

Molla, Md Mamun (2009) LES of pulsatile flow in the models of arterial stenosis and aneurysm. PhD thesis, University of Glasgow.

Muhammad Saleh, Muhammad Fadzli (2013) Active improvement of air-conditioning system energy consumption with adaptive thermal comfort approach. MSc(R) thesis, University of Glasgow.

Murray, Christopher (2011) Continuous Earth-Moon payload exchange using motorised tethers with associated dynamics. PhD thesis, University of Glasgow.

Murray-Smith, David J. (2009) Methods of system identification, parameter estimation and optimisation applied to problems of modelling and control in engineering and physiology. DSc thesis, University of Glasgow.

Mustafa, Zaleha Binti (2013) Multiaxial fatigue characterization of self-reinforced polylactic acid-calcium phosphate composite. PhD thesis, University of Glasgow.

Nelson, D. James (1976) On the mechanics of discontinuous fibre reinforced composite materials (with particular reference to damping). PhD thesis, University of Glasgow.

Neville, Anne (1995) An investigation of the corrosion behaviour of a range of engineering materials in marine environments. PhD thesis, University of Glasgow.

Ng, Eric Eng Seng (1999) Laser welding of high carbon steels. PhD thesis, University of Glasgow.

Nisar, Jawad Ahmad (2010) Modelling the interfaces of bondable pultrusions. PhD thesis, University of Glasgow.

Nnabalu, Chinwendu Rita (2022) Petroleum refining revolution: Optimisation solutions to improve efficiency and maintainability. PhD thesis, University of Glasgow.

O'Neill, Simon James (2012) Control of vehicle lateral dynamics based on longitudinal wheel forces. MSc(R) thesis, University of Glasgow.

Oo, Khin Maung (1974) The design of semi-submersibles for minimum vertical motion. PhD thesis, University of Glasgow.

Osman, Hafiiz (2018) Ultrasonic disinfection using large area compact radial mode resonators. PhD thesis, University of Glasgow.

Ouyang, Donald N.B. (1998) The dynamic modelling of industrial oxygen gas jet assisted CO₂ laser cutting of metal. PhD thesis, University of Glasgow.

Pan, Zhongyin (2015) Modelling and design of ultrasonic bone cutting blades. PhD thesis, University of Glasgow.

Paul, Sreebash Chandra (2008) Large eddy simulation of a fuel-rich turbulent non-premixed reacting flow with radiative heat transfer. PhD thesis, University of Glasgow.

Pennycott, Andrew (2008) The application of estimation and control techniques in 2 modes of exercise for the spinal cord injured. PhD thesis, University of Glasgow.

Perris, Jack Alan Nathaniel (2023) Studies on the fabrication and contact stiffness of mechanical interfaces with tailored rough and structured surfaces. PhD thesis, University of Glasgow.

Perry, Joan M. (2001) Erosion-corrosion of WC-Co-Cr cermet coatings. PhD thesis, University of Glasgow.

Pilidis, Pericles (1983) Digital simulation of gas turbine performance. PhD thesis, University of Glasgow.

Pino, Monica (2010) Apatite deposition on NaOH-treated HDPE, PEEK and UHMWPE films for sclera materials in artificial cornea implants. PhD thesis, University of Glasgow.

Piron, Marielle (1999) Dynamic analysis of fast-acting solenoid actuators. PhD thesis, University of Glasgow.

Poh, Ping Yi, Leslie (2019) Experimental and numerical study of silicon nitride for powder injection moulding. PhD thesis, University of Glasgow.

Qiu, Yihong (2003) Measurement and analysis of breath sounds. PhD thesis, University of Glasgow.

Redzuan, Norizah (2010) Cold plasma air decontamination. PhD thesis, University of Glasgow.

Renucci, Michael Peter (1984) Mathematical modelling techniques for the computer simulation of vehicle dynamic performance and response. PhD thesis, University of Glasgow.

Richards, Daniel (2020) An ultrasonically assisted sagittal saw for large bone surgeries. PhD thesis, University of Glasgow.

Roberts, David Wynn (1993) Bond graph model based control of robotic manipulators. PhD thesis, University of Glasgow.

Rose, Michael Leon James (1998) Development of a muscle powered blood pump: fluid mechanic considerations. PhD thesis, University of Glasgow.

Runcie, Callum John (2023) First order conservation law framework for large strain explicit contact dynamics. PhD thesis, University of Glasgow.

Russell, John William (2015) A study of axial joint behaviour in a high power ultrasonic device through transfer function synthesis. PhD thesis, University of Glasgow.

Saeed, Ali (2023) On the dynamic effects upon unsteady cooling of Lithium-ion batteries. PhD thesis, University of Glasgow.

Saunders, Benjamin A. (2002) Automotive climate control based on thermal state estimation. PhD thesis, University of Glasgow.

Schinkel, Michael (2002) Nondeterministic hybrid dynamical systems. PhD thesis, University of Glasgow.

Schubert, Gerlind (2014) Manufacture, characterisation and modelling of magneto-rheological elastomers. PhD thesis, University of Glasgow.

Seat, Han Cheng (2001) Growth and characterisation of single-crystal fibres for sensing applications. PhD thesis, University of Glasgow.

Shaw, Brian H. (1976) Heat and mass transfer by convection through large rectangular openings in vertical partitions. PhD thesis, University of Glasgow.

Sheafi, Emadeddin A.Mansur (2015) Effects of various test regimes on fatigue behaviour of PMMA bone cement: a comparative study. PhD thesis, University of Glasgow.

Shi, Patrick Chee Wai (2006) Single crystal fibres and their applications. PhD thesis, University of Glasgow.

Shrestha, Suman Kumar (2000) Corrosion and erosion-corrosion of High Velocity Oxy-Fuel (HVOF) sprayed NiCrSiB coatings. PhD thesis, University of Glasgow.

Siviter, Jonathan Peter (2014) Increasing the efficiency of the Rankine cycle using a thermoelectric heat pump. PhD thesis, University of Glasgow.

Smith, Margaret J. (2007) The use of hydrogels to prevent biofouling on underwater sensors. PhD thesis, University of Glasgow.

Stone, Barry A. (2005) Control strategies for functional electrical stimulation induced cycling. PhD thesis, University of Glasgow.

Su, Xiangrong (2009) Parametric vibration of composite beams with integrated shape memory alloy elements. PhD thesis, University of Glasgow.

Talal, Ahmed (2009) Investigation of the application of polylactic acid-calcium phosphate composite materials as novel periodontal barrier membranes. PhD thesis, University of Glasgow.

Terfas, Osama Abdulhamid (2010) Quantification of constraint in three-dimensional fracture mechanics. PhD thesis, University of Glasgow.

Thomson, Ronald D. (1985) Ductile fracture by void nucleation, growth and coalescence. PhD thesis, University of Glasgow.

Timoney, Ryan (2019) Enabling technologies for the subsurface exploration of the solar system. PhD thesis, University of Glasgow.

Trchalik, Josef (2009) Aeroelastic modelling of gyroplane rotors. PhD thesis, University of Glasgow.

Vassiliou, George E. (2001) The erosion-corrosion behaviour of copper-nickel alloys. PhD thesis, University of Glasgow.

Wang, Dong (2014) Characterising the effects of power ultrasonic devices on surrogate tissue materials. PhD thesis, University of Glasgow.

Waterton, Richard James (2004) Analysis of the soliton solutions of a 3-level Maxwell-Bloch system with rotational symmetry. PhD thesis, University of Glasgow.

Worms, Georg (2011) Design and evaluation of artificial controllers assisting voluntary balance performance in paraplegia and in stroke. PhD thesis, University of Glasgow.

Wu, Jia-Jang (2000) An analysis of the structural dynamics of a mobile gantry crane with application to automation of container management. PhD thesis, University of Glasgow.

Xenos, Dimitrios (2015) Nonlocal modelling of fracture in heterogeneous quasi-brittle materials. PhD thesis, University of Glasgow.

Xia, Chunming (2003) Control loop measurement based isolation of faults and disturbances in process plants. PhD thesis, University of Glasgow.

Xing, Mengchuan (2020) Fabrication of single-crystal sapphire fibres for sensor applications. PhD thesis, University of Glasgow.

Yahya, Najeeb Ali (2015) Failure analysis of bonded steel/CFRP laminate connections. PhD thesis, University of Glasgow.

Yassi, Yousef (1999) An experimental study of improvement of a micro hydro turbine performance. PhD thesis, University of Glasgow.

Young, Rupert Charles David (1994) Bandpass filters for unconstrained target recognition and their implementation in coherent optical correlators. PhD thesis, University of Glasgow.

Yuceer, Ahmet (1985) Pressure drops along the bores of hollow fibre membranes: their measurement, prediction and effect on fibre bundle performance. PhD thesis, University of Glasgow.

Yusof, Feizal (2006) Three-dimensional constraint based fracture mechanics. PhD thesis, University of Glasgow.

Zang, Xiaoyun (2005) Root cause isolation of propagated oscillations in process plants. PhD thesis, University of Glasgow.

Zhang, Nan (2023) Heat pump integrated energy systems for future zero-emission vehicles. PhD thesis, University of Glasgow.

Zuiani, Federico (2015) Multi-objective optimisation of low-thrust trajectories. PhD thesis, University of Glasgow.

This list was generated on Thu Mar 28 01:48:23 2024 GMT.